Question: Is a JST connector safe for 3S packs on small RC planes?
Answer: JST connectors, commonly the JST-PH or JST-RCY types, are often used in small RC applications, but their suitability depends on the current draw. For 3S LiPo packs (11.1V), typical small plane setups draw between 5A and 15A. Standard JST connectors are usually rated for around 3A to 5A continuous current, which can be borderline or insufficient for 3S packs powering motors. To ensure safety, check the connector's current rating and compare it with your setup’s maximum current draw. If your motor or ESC can pull more than 5A, consider upgrading to connectors rated for higher current, such as XT30 or Deans. Also, inspect connectors regularly for heat or damage, as excessive current can cause melting or failure. In summary, JST connectors can be safe for low-current 3S setups but are generally not recommended if your plane demands higher power. For peace of mind and reliability, use connectors rated above your expected current load and always double-check wiring and solder joints.
Comments
Post a Comment